We’ve had a 1.2m x 1.2m CNC machine for a while, but it’s about to move in to its new home and be furnished with a backed-up 1600kVA power supply. The vacuum dust extractor unit on its own takes nearly that much, so that won;t be backed up and  it’ll be out with the handyvac to clear the sawdust if the power goes off.

2013-11-08 18.37.31

Machine A fits into slot B


The slight problem with the move is that the CNC won’t fit in through the soundproof room’s door. So we’ve smacked a big hole in the wall with great gusto and will frame & conceal said hole with some very large pinboards. This will allow us to add more CNC machines to the soundproof room, and move them in and out for repair etc.

« »